ATTACHMENT

1. Specifications of Model MSB 9-50

The technical specifications and description of machinery are as listed below.

2. Equipment for the MSB 9-50

• Easy conversion device for knot configuration (from single knot to double knot and vice versa)
• Device prevent from slope of shuttles with Urethane
• Automatic anti-vibration device with mechanical brake
• Automatic warp tension control device
• Accurate mesh forming device
• Weight roller for the net forwarding device
• Weight roller for the net forwarding roller
• Knot tightening device installed at 2 places in the middle part of the machine by easy adjustment

system

• Speed change device by variable speed changer
• Mesh forwarding device by the ratchet roller system.

The rollers of the ratchet can be changed easily to new roller within a short time.

• Reverse-proof device by the cam clutch system
• Lower hook rail to get stable and smooth lower hook motion
• Auto warp supply device
• Warp roller control device with the disk brake
• Operation switch box at 3 places
• Automatic stop motion device
  1. For warp twine breakage
  2. For empty bobbin of weft twine
  3. For empty warp or loosen warp twine on the creel
  4. For tighten warp on the creel
  5. For shuttle jump
  6. For presetting knot counter
  7. For safety of electric motor
  8. For warp supply (loosen)
  9. For warp supply (tighten)
• Totally enclosed safety cover at both ends of the machine (to be made locally)
• Anti-vibration device by automatic timing detection system
• Twine separator device
• Passage between the main body of the machine and net take up device.
• Bobbin Winder, B-2 2 turn-heads 1 set (to be made in locally except standard accessories
• All the cams designed with advanced CAD system (smooth and anti-wearing)
  Hardness : more than 50 (rockwell hardness)
  Surface finishing : machine grinding
• Advanced warp tension control device
  a. Main warp roller – new torque limiter system with gauge
  b. Sub warp roller – constant brake system
• Weft feeding system with actual gauge
• Safety chain cover (to be made locally)
• Net winding device
• Knot forming angle with a hard chrome pipe
• Double guide hook with a special nitration treatment

3. Spare Parts for MSB 9-50 /set (for Individual / Whole lot Bobbin Change)

4. Standard accessories for Model MSB 9-50 /set (for Individual / Whole Bobbin Change)

5. Remarks:

1. In case for making Nylon Mono net, specification shows on the basis of using Japanese made
   material or equivalent ones.
2. The thicker twines should be tied after untwisting of twine to make knot smaller.
3. The smallest mesh sizes vary according to the machine speed, twine quality, factory condition, etc.
4. Machine speeds vary according to mesh size, twine size, factory condition, etc.

6. Standard accessories for B-2 Bobbin Winding Machine/set for MSB9-50